IBM Proprinter - Page 190

how to tell when the printer
has an error 5-16
how to test the printer 2-18
how to test the printer
(self-test) 2-18
HT 4-6
HT, underscores 4-29
HT, when reset 4-20
incorrect line spacing 5-13,
5-14
incorrect number of lines on a
page 5-12
incorrect print test
pattern 2-20
incorrect printing 5-21
indicators 3-4
INIT (initialize) 4-32
ink smudges 5-9
installing forms 3-13
installing the ribbon
cartridge 2-7
interface, defined X-2
interface, described 2-4
interface, parallel B-1
interface, serial 2-4
interfaces 2-4
internal character sets 4-27,
4-28
introduction 1-3-1-9
jams, paper 5-17
jumper cable 2-4
keys 3-5
knob, paper advance 3-9
knob, ribbon 2-12
label, operator panel 2-6
label, power requirements 2-3
labels, use of 3-19
left edge guide 2-15, 3-16
left margin 3-24
left margin problems 5-14, 5-15
left margin setting for cut
forms 3-18
length of form, switch 4-12,
6-4
length of line wrong 5-14
letter quality (LQ) X-2
lever, forms thickness 3-11
lever , paper release 3-10
levers 3-9
LF 4-3, 4-5, 4-6, 4-25, 4-27, 6-4,
D-1
light printing 3-12, 5-8, 5-10
lights 3-4
line feed 3-6
line feed (LF) 4-3, 4-6
line feed, automatic 4-27
line spacing, incorrect 5-13,
5-14
line spacing, variable 4-9,
4-15, 4-25, 4-26
lines per inch, controlling 4-9,
4-24, 4-25
lines, wrong number of on a
page 5-12
loading forms 3-13
location of printer 2-3
locations of parts 1-9
loose printer cable, symptom
for 5-12
LPRINT, defined X-2
LPRINT, use of 4-3
X-9