IBM Proprinter

Code
ESC C 0
ESCD
4-12
Description
Set Form Length in Inches
Format: ESC C;O;n;
Sets the form length in inches. This
sequence overides the setting of the form
length switch (switch 4).
This sequence also sets the current position
of the paper as the top of form.
LPRINT CHR$(27) ;CHR${67) ;CHR$(0);
CHR$ (n ) ;
or ,
LPRI NT CHR$(27);
11
C
11
;CHR$(0);
CHR$ ( n);
Note: Automatic perforation skip (ESC N) is
reset. If n = 0, the printer ignores this
sequence.
Set Horizontal Tabs
Format: ESC D;n
1
;n
2
;
••• n
28
;0;
Sets the horizontal tab stop positions
represented by n
1
through n
28
•
The power on
setting is a tab stop every eight positions,
beginning at column 9. The printer
recognizes up to 28 horizontal tab stops.
The tabs must be in ascending order and
followed by 0. Tab stops can be set starting
with 1. ESC D 0 cancels all previous tab
settings. ESC R sets all horizontal tabs to
power on values.
LPRI NT CHR$(27) ;CHR$(68) ;CHR$(n
1
);
CHR$(n
2
); ••• CHR$(n~) ;CHR$(0);
or,
LPRINT CHR$ ( 2 7) ;
11
D
11
; CHR$ ( n
1
) ;
CHR$(n
2
); ••• CHR$(n~) ;CHR$(0);
..._/-