IBM RS/6000 7014-S00

Step 5
(from Step 2, Step 3, and Step 4)
1. Set the power switch of all devices and drawers in the rack to the off position.
2. Set all the circuit breaker switches on the power distribution panel to Off.
3. Connect the power cables from all devices and drawers in the rack to the power
distribution panel.
4. Set all of the circuit breaker switches on the power distribution panel to On.
5. This completes the repair. Go to "MAP 0410: Repair Checkout" in the
Diagnostics Information for Multiple Bus Systems .
5-8 7014 Model S00 Rack Installation and Service Guide