Test the Computer
à ð
System Management Services
Select one:
1. Select Boot Devices
2. Test the Computer
3. Utilities
4. Select Language
Enter - q=Quit - h=Help - r=Reboot - s=Start OS - p=prev-item -
------- -------- -------- ---------- ------------ -------------
n=next-item -
-------------
Press enter to select item number 2.
á
ñ
This selection enables you to test devices and functions of your system. The screen
that displays, is similar to the screen that follows.
à ð
Select Device to Test
q=Quit -
--------
h=Help -
[>] Test Memory --------
Spacebar=Choose -
-----------------
p=Parm Setup -
--------------
E=Execute -
-----------
1. Test Memory d=Display Error Log -
---------------------
á
ñ
When you have selected the devices you want to test, press p to set the test
requirements, such as the number of times the tests are to be run, and whether
testing should stop if an error occurs. After you set the requirements, press Enter to
return to the Select the Device to Test screen; then press E to start the tests.
To see if any errors were recorded in previous tests, press d to display the error log.
5-18 Service Guide
To Next Page
Loading...
