Battery
CAUTION:
A lithium battery can cause fire, explosion, or a severe burn. Do not recharge,
disassemble, heat above 100°C (212°F), solder directly to the cell, incinerate, or
expose cell contents to water. Keep away from children. Replace only with the
part number specified for your system. Use of another battery may present a
risk of fire or explosion.
Removal
1. If you have not already done so, remove the covers as described in “Covers” on
page 7-3.
2. Locate the battery on the system board.
Battery
3. Use one finger to slightly slide the battery toward the front of the server. (The
spring mechanism behind the battery pushs it out toward you as you slide it
forward.) Use your thumb and index finger to hold the battery as it pushes out of
the socket.
Chapter 7. Removal and Replacement Procedures 7-25
To Next Page
Loading...
