Fan and Speaker Assembly
Removal
1. If you have not already done so, remove the covers as described in “Covers” on
page 7-3.
2. Remove the fan and speaker leads from the system planar.
3. Using a flat-head screwdriver, push upward on the lower set of plastic tabs that
protrude through the front of the system unit chassis.
4. Swing the bottom of the speaker and fan assembly away from the front of the
system unit, then remove the entire speaker and fan assembly.
Replacement
To replace the speaker and fan assembly, perform the removal steps in the reverse
order.
Chapter 7. Removal and Replacement Procedures 7-27
To Next Page
Loading...
