Step 1540-1
1. Ensure that the diagnostics and the operating system are shut down.
2. Turn the power off.
3. Turn the power on.
4. Insert the diagnostic CD-ROM into the CD-ROM drive.
5. When the POST indicators are displayed and before the long beep, press the F5
key (Graphics) or number 5 key (ASCII terminal).
6. Wait until the "Please define the system console" screen is displayed or the
system appears to stop.
Is the "Please define the System Console" screen displayed?
NO Go to “Step 1540-2” on page 2-20.
YES Go to “Step 1540-13” on page 2-30.
Chapter 2. Maintenance Analysis Procedures 2-19
To Next Page
Loading...
