Step 1540-7
If you removed a service processor in “Step 1540-2” on page 2-20, continue with this
step.
If you did not remove a service processor in “Step 1540-2” on page 2-20, go to
“Step 1540-8” on page 2-25.
1. Turn the power off.
2. Install the service processor.
3. Turn the power on.
4. Wait until the system beeps twice or the system appears to stop.
Did the system beep twice?
NO Replace the service processor.
YES Go to “Step 1540-8” on page 2-25.
2-24 Service Guide
To Next Page
Loading...
