Test the Computer
à ð
System Management Services
Select one:
1. Select Boot Devices
2. Test the Computer
3. Utilities
4. Select Language
Enter Esc=Quit F1=Help F3=Reboot F9=Start OS
á
ñ
This selection enables you to test devices and functions of your system. The screen
that displays, is similar to the screen that follows.
à ð
Select Device to Test
Esc=Quit
F1=Help
[ ] Test Memory
Spacebar=Choose
[ ] Test Memory
F4=Parm Setup
F6=Execute
F9=Display Error Log
á
ñ
When you have selected the devices you want to test, press F4 to set the test
requirements, such as the number of times the tests are to be run, and whether
testing should stop if an error occurs. After you set the requirements, press Enter to
return to the Select the Device to Test screen; then press F6 to start the tests.
To see if any errors were recorded in previous tests, press F9 to display the error
log.
Chapter 5. System Management Services 5-13
To Next Page
Loading...
