invalid SSA loop configurations 5-11
L
language selection A-15
laser compliance statement 7-46
laser safety information xv
light
on connectors 5-14
link
active 5-14
loading the system diagnostics 4-1
location
code format 5-12
location code
format 3-48
location codes 3-48, 3-50
AIX 3-57
physical 3-48
locations
I/O 1-4
memory 1-5
system board 1-5
system unit 1-1
logical units (LUN) 5-15
loop
configurations, SSA, invalid 5-11
data paths, description of 5-16
links 5-13
SSA, rules 5-15
loops 5-14
LUN (logical units) 5-15
M
maintenance analysis procedures
(MAPs) 2-1, 2-43
minimum configuration Map 2-25
power MAP 2-10
problem determination MAP 2-5
MAPs (maintenance analysis proce-
dures)
starting 2-45
using 2-43
memory bits 3-28
memory card locations 1-5
memory cards
removal and replacement 7-27
menu inactivity A-3
menus
general user A-4
privileged user A-6
service processor A-3
service processor call-in/call-out
setup A-16
service processor call-out policy
setup A-20
service processor customer account
setup A-22
service processor language
selection A-15
service processor reboot policy
setup A-23
service processor serial port
selection A-17
service processor serial port speed
setup A-18
service processor setup A-8
service processor system
information A-13
service processor system power
control A-12
service processor telephone
setup A-18
support menus
service processor menus A-2
service processor service
aids A-2
SMS A-2
Index X-3
To Next Page
Loading...
