FCIS_ADDR37 to FCIS_ADDR51
are not used by file control.
FCIS_ADDR52
is the address of a 4-byte area containing the data from JOURNALNUM.
FCIS_ADDR53
is the address of a 4-byte area containing the data from LOADTYPE.
FCIS_ADDR54
is the address of a 4-byte area containing the data from CFDTPOOL.
FCIS_ADDR55
is the address of a 4-byte area containing the data from TABLENAME.
FCIS_ADDR56
is the address of a 4-byte area containing the data from UPDATEMODEL.
FCIS_ADDR57
is the address of a 4-byte area containing the data from REMOTETABLE.
FCIS_ADDR58
is the address of a 4-byte area containing the data from RBATYPE.
Modifying fields in the command-level parameter structure
Some fields that are passed to file control SPI requests are used as input to the
request and some are used as output to the request. The method that your user
exit program uses to modify a field depends on the usage of the field. As a general
rule:
v On INQUIRE FILE requests, all fields except FILE are output fields.
v On SET FILE requests, all fields are input fields.
For a full description of the parameters to INQUIRE FILE, see Table 5. For a full
description of the parameters to SET FILE, see Table 6 on page 108.
Table 5. INQUIRE FILE requests. The relationship between arguments, keywords, data
types, and input/output types.
Argument Keyword Data Type Input/Output
Arg1 FILE CHAR(8) See note.
Arg2 DSNAME CHAR(44) Output
Arg3 FWDRECSTATUS BIN(31) Output
Arg4 STRINGS BIN(31) Output
Arg5 BASEDSNAME CHAR(44) Output
Arg6 LSRPOOLID BIN(31) Output
Arg7 READ BIN(31) Output
Arg8 UPDATE BIN(31) Output
Arg9 BROWSE BIN(31) Output
Arg10 ADD BIN(31) Output
Arg11 DELETE BIN(31) Output
Arg12 DISPOSITION BIN(31) Output
Arg13 EMPTYSTATUS BIN(31) Output
Arg14 OPENSTATUS BIN(31) Output
Arg15 ENABLESTATUS BIN(31) Output
Chapter 1. Global user exit programs 107
|
|
To Next Page
Loading...
Need help?
General