DFHWOSM FUNC=TERM macro
The DFHWOSM FUNC=TERM macro terminates communication between the
overseer program and DFHWOS, and releases any associated storage. It must be
issued before the overseer program completes to ensure an orderly termination.
Input
The TOKEN value is the BUILD token.
Output
Register 15
Contains the following completion codes:
0 Communication terminated successfully
Nonzero
Request failed.
Customizing the sample XRF overseer program
The sample overseer program consists of four modules link-edited together. The
main module is DFH$AXRO; the other three modules are subroutines, described
below:
DFH$AGCB
sets up request parameter lists (RPLs), access method control blocks
(ACBs), and parameter lists.
DFH$ADSP
displays status information.
DFH$ARES
performs restart in place.
DFHDXGHD DSECT
GHDDXADB DS CL4 DBCTL SSID
GHDDXRSE DS CL8 IMS RSE name
GHDDXCTM DS CL4 IMS connect time
GHDDXDTM DS CL4 IMS disconnect time
GHDDXJNM DS CL8 JES Job name of old active IMS
GHDDXJID DS CL8 JES Job ID of old active IMS
GHDDXASD DS H ASID of old active IMS
GHDDXIRT DS X IMS region type
DXRHTSBY EQU X’01’ region type is hot standby
DXRDBDC EQU X’02’ region type is IMS DB/DC
DXRDBCTL EQU X’04’ region type is DBCTL
GHDDXTYP DS X GHD message type
DXMCNNCT EQU X’01’ Message type = DBCTL connection
DXMDISC EQU X’02’ Message type = DBCTL disconnect
DXMDRAF EQU X’04’ Message type = DRA failure
DXMABEND EQU X’08’ Message type = DBCTL abend
DXMERROR EQU X’80’ Indicates severe error in DFHDBCT
DXGHDLEN EQU *-DFHDXGHD length of CICS XRF/DBCTL GHD
ORG ,
Figure 70. DFHDXGHD copy book
label DFHWOSM FUNC=TERM
[,TOKEN={token register|14}]
Chapter 26. The extended recovery facility overseer program 703
To Next Page
Loading...
Need help?
General