FLJB_TUR_MAXIMUM_LRECL
4-byte maximum record length.
FLJB_TUR_BASE_KEY_POSITION
4-byte base key position in record.
FLJB_TUR_BASE_KEY_LENGTH
2-byte base key length.
FLJB_TUR_DATASET_TYPE
1-byte data set type:
X’C5’ Standard ESDS
X’D2’ KSDS
X’D7’ Path
X’D9’ RRDS
X’E5’ VRRDS
X’E7’ Extended ESDS
FLJB_TUR_RECORD_FORMAT
1-byte record format:
X’E5’ Variable
X’C6’ Fixed
FLJB_TUR_BASE_DSNAME_LENGTH
2-byte length of base data set name.
FLJB_TUR_BASE_DSNAME
44-byte base data set name.
FLJB_TUR_PATH_DSNAME_LENGTH
2-byte length of path data set name.
FLJB_TUR_PATH_DSNAME
44-byte path data set name.
FLJB_TUR_FWDRECOVLOG_NAME
26-byte log stream name of forward recovery log.
FLJB_TUR_BITS
1-byte flag field.
Reserved
1-byte reserved field.
Note: The format of caller data in journal records written by file control in RLS
mode is identical to that in journal records written by file control in non-RLS
mode except for FLJB_TUR_BITS where a value of X'80' indicates
RLS-access.
Terminal control prefix data
CICS terminal control (TC) writes journal records to track the messages it issues.
Each TC journal record contains a prefix area, which lies in the position of the prefix
area in the API user header. For LU6.1-related records only, the prefix area
contains the VTAM physical sequence numbers at syncpoint time; for all other TC
journal records, it contains binary zeros. The format of the TC prefix area is shown
in Figure 87 on page 727.
726 Customization Guide
To Next Page
Loading...
Need help?
General