identifiers:
No internal or external SCSI connectors (uses the server's onboard SCSI)
Two notches in the PCI connector (versus four notches in the ServeRAID-5i)
Notes
:
The 6i and 6i+ are physically identical adapters. The only difference is that the 6i+ is flashed at the factory to V7.0
firmware to support the x206 and x306. A ServeRAID-6i+ is supported in servers that support the ServeRAID-6i.
The battery shown in the photo is not a production-level battery.
ServeRAID 7t
(part 71P8648, 2004 and 39R8805, 2006)
US Announcement Letter: 104-075
To Next Page
Loading...
