A highly available and expandable, rack-dense, 2U dual-socket SMP server, for application 
serving in Web environments 
Please see the Legal Information section for important notices and information. 
2
Selling Features 
Price/Performance 
The x3650 offers numerous features to boost performance and reduce product and operating 
costs: 
•  Up to two quad- or dual-core Xeon processors with high-end 1333MHz or 1066MHz front 
side bus and 4MB to 12MB (processor-specific) of integrated Level 2 cache per processor 
offer superior performance capable of tackling the toughest jobs. 64-bit extensions provide 
the flexibility to run 32-bit and 64-bit applications concurrently.  
•  Low-voltage processors draw less power and produce less waste heat than high-voltage 
processors, thus helping to reduce data center energy costs. Some dual-core Xeon 
processors use only 65W. This is half the wattage consumed by older 130W processors. The 
50W and 80W quad-core processors are even more economical, consuming only 12.5W 
and 20W (respectively) per core, vs. 32.5W per core for the 65W dual-core processors. 
•  Ultra-fast fully buffered 667MHz PC2-5300 DDR II ECC memory with Chipkill protection 
provides speed and high availability. 
•  Four high-speed PCI-E adapter slots offer potential investment protection by supporting 
high-performance adapters, such as 10Gb Ethernet, Fibre Channel and InfiniBand cards, 
none of which will run in older 33MHz and 66MHz conventional PCI slots. 
•  Integrated ServeRAID-8k-l provides RAID-0/1/10 support at no extra charge and without 
consuming a valuable adapter slot. RAID-0 offers improved disk performance via data 
striping; RAID-1 offers disk mirroring for high availability, and RAID-10 combines the benefits 
of speed and availability. 
•  Up to six 3.5-inch or eight 2.5-inch (depending on the model) hot-swap SAS or six 3.5-
inch hot-swap SATA hard disk drives offer high-performance with high availability. The SAS 
controller provides full-duplex (2 x 300MBps) SAS data transfers, nearly double that of half-
duplex Ultra320 SCSI (1 x 320MBps), or half-duplex SATA transfers (1 x 300MBps). 2.5-
inch drives consume approximately half the power of 3.5-inch drives. 
•  The integrated dual Gigabit Ethernet controllers with IPMI 2.0 support provide high-speed 
network communications. Jumbo Frames offer higher efficiency transfers for large data 
packets. 
•  The TCP Offload Engine (TOE) feature offers higher performance for TCP/IP traffic, with less 
overhead on the system processor. 
•  A high degree of device integration, including SAS, RAID, dual Gigabit Ethernet, systems 
management and video controllers, helps to lowers costs and frees up valuable adapter 
slots. 
 
Flexibility 
The x3650 has the ability to grow with your application requirements, thanks to:  
•  A choice of quad-core or dual-core processors with 1.6 to 3.16GHz clock rates, 1333MHz 
or 1066MHz FSB, and 50W to 120W maximum power draw. 
•  Up to 48GB of high-speed fully-buffered DDR2 system memory. 
•  Four available high-performance PCI-E adapter slots in all models. Optionally, if desired, 
the riser card containing two of the PCI-E slots can be exchanged for a riser containing two 
PCI-X/133 adapter slots. 
•  Installing the slotless ServeRAID-8k option upgrades the integrated ServeRAID-8k-l 
controller with low-cost battery-backed cache to enable even higher-performance hardware 
RAID support, and offering six RAID levels, including RAID-1E, 5 and 6. 
•  The seven USB 2.0 ports (six external, one internal) are up to 40X faster
2
 than older USB 
1.1 ports. This provides speedy access to external HDDs (non-arrayed), optical drives, tape 
drives, and other USB devices. Two ports are on the front of the unit and four are on the 
back. The internal port supports one tape or GoVault EZ backup drive. 
•  An integrated SATA II controller provides support for SATA-based internal backup 
storage 
•  A choice of up to four internal 3.5-inch HDDs and a backup (internal tape or GoVault) 
drive, six 3.5-inch HDDs without a backup drive, or eight internal 2.5-inch HDDs and a 
backup drive—depending on the model—offer a variety of storage options. The 3.5-inch 
models provide a maximum of 1.8TB of internal hot-swap SAS storage (1.2TB with an 
internal backup drive installed) or 6TB of internal hot-swap SATA storage (4TB with internal 
backup drive). The 2.5-inch models support up to 1.17TB of hot-swap SAS storage in 
addition to an internal backup drive.  
•  Alternatively, iSCSI or Fibre Channel-attached storage can be attached using IBM System 
Storage
™
 or TotalStorage
®
 servers. 
2
 Data transfer rates may be less than the maximum possible.