Auto Test Performs multiple tests of the selected
items and checks the selected test items in sequence.
Note: PCMCIA Diagnostic supports manual test only. Do
not select PCMCIA Diagnostic in Auto Test.
The screen below appears if you select AUTO Test.
Specify the desired number of tests and press Enter.
After you specify the number of tests to perform, the
screen shows a list of test items (see below).
Press ↑or ↓ to move the highlight bar from one item to
another. Press Space to enable or disable the item. The
> mark indicates that there are available suboptions.
Press Enter to view the available suboptions of each
selected item. Press Esc to close the submenu.
The right corner screen information gives you the available
function keys and the specified test number.
ThinkPad 310, 310D, 310E, 310ED (2600)
27
To Next Page
Loading...
Need help?
General