IBM ThinkPad 380 - Page 134

Installing IBM OS/2 Software
d) Click on ThinkPad System Management Device Driver;
then click on OK.
3. Open the OS/2 screen command prompt.
4. Go to the A: prompt and type INSTALL2; then press Enter.
Follow the instructions on the screen.
5. Install the Windows ThinkPad Features program for the
WIN-OS/2 session:
a) Exit the OS/2 screen; then open a WIN-OS/2 full screen.
b) Follow the instructions in “Installing the ThinkPad Features
Program for Windows Version 3.11” on page 126.
6. Install the DOS ThinkPad Features program to use the PS2
commands:
a) Exit the WIN-OS/2 full screen; then open a DOS full screen.
b) Follow the instructions in “Installing the ThinkPad Features
Program for DOS” on page 121.
114 IBM ThinkPad 380 or 380D User's Guide