IBM ThinkPad 380 - Hibernation Problems

Installing Windows NT Software
When you use these token-ring cards, you need to install the IBM
PCMCIA Token Ring Device Driver. Use the Windows NT PCMCIA
Token Ring Device Driver files in NTTRCC.ZIP for your Windows NT.
To install the device driver:
Note
Before you install this driver, you must first install Windows NT
Service Pack #2 or a later release.
1. Click on Main in the Program Manager screen. Then click on
Control Panel, Network, and Add Adapter.
Windows NT prepares a list of the network adapters it supports.
2. Click on the dropdown list icon, and scroll to the bottom of the
list and click on <Other> Requires disk from manufacturer.
3. When you are prompted, insert the device driver diskette into the
diskette drive. Follow the instructions on the screen.
4. When you are finished adding the adapter, click on OK and
follow the instructions on the screen.
Installing the PCMCIA Adapter Card Network Device Driver for
Windows NT Version 4.0
Windows NT V4.0 supports integrated network adapter cards for
PCMCIA network adapter, ISA adapter, and PCI network adapter
cards. To install your adapter card's network device driver, do the
following:
1. Click on My Computer.
2. Click on Control Panel; then click on Network.
3. Click on the Adapters tab at the Network menu; then click on
Add.
4. Select your network adapter from the option list.
The following table shows the adapter driver names for the IBM
PCMCIA network adapter cards given in the option list:
136 IBM ThinkPad 380 or 380D User's Guide