IBM ThinkPad 380 - Infrared Communication Problems

5. Click on OK to install the files.
You will be prompted for the drive and path name for the file
location.
6. Follow the instructions on the screen.
During the installation of the network device driver, you are prompted
to enter the option parameters for the adapter card. The following
are the most common recommended parameters:
For IBM Token Ring PCMCIA CCA I, IBM Token Ring PCMCIA
CCA-II, IBM Auto 16/4 PCMCIA Token Ring:
I/O address: Primary
Type: PCMCIA
Bus number:0
IRQ level: 7 or 9
Memory base address: 0xCA000 or a higher value
For IBM Ethernet-II PCMCIA Card:
I/O address: 200, 260, or a higher value
IRQ level: 7 or 9
Memory base address: 0xC8000 or a higher value
Adapter Card Type Adapter Driver Name in the Option List
IBM Token Ring PCMCIA
CCA-I
IBM Token Ring (ISA/PCMCIA) Adapter
IBM Token Ring PCMCIA
CCA-II
IBM Token Ring (ISA/PCMCIA) Adapter
IBM Auto 16/4 PCMCIA
Token Ring
IBM Token Ring (ISA/PCMCIA) Adapter
IBM Ethernet-II PCMCIA
Card
IBM Ethernet PCMCIA and Compatible
Adapter
Chapter 7. Installing Software 137