IBM ThinkPad 380 - Page 204

Advanced Information for PC Card for OS/2
Changing the Resource Information for the PC Card
1. Select the PC Card you want to change from the left list box in
the Auto Configurator Utility main panel.
2. Click on the Edit... button.
The following screen is displayed:
Note:
The current resource information is
set as the default and appears in the
input field of each item. The number
that can be set is displayed in the
pull-down list box.
Auto Configurator Utility - Edit
Title
Card ID
I/O port 1
I/O Port 2
IRQ level
COM No.
Memory window 1
Base address
Size
Card offset
Memory window 2
Base address
Size
Card offset
Modem Card [2F8]
MODEM,MD24XC,116E2,118C2,FC2400,2460MC
Description:
Interrupt [IRQ] Level
Ok Cancel Help
3. You can change the following registered information for the PC
Card:
The items that can be changed differ among PC Cards:
Card ID
I/O port address
IRQ level
COM number of the serial port
Memory window address
Memory window size
Card offset address
4. Click on the OK button, and save the changes.
To cancel the changes, click on the Cancel button.
184 IBM ThinkPad 380 or 380D User's Guide