Adding to the CONFIG.SYS File
Adding to the CONFIG.SYS File
For PC Card Director to work correctly, the PC Card device drivers
(which make up the structured file of PC Card Director) must be
registered in the CONFIG.SYS file. These drivers are automatically
registered in the CONFIG.SYS file when you install PC Card Director
following the instructions in Chapter 7. The following shows each
driver registered in the CONFIG.SYS file and the standard rules.
Registered Drivers and Standard Rules
The following is a sample of the CONFIG.SYS file for OS/2:
:
BASEDEV=PCMCIA.SYS (Card Services)
BASEDEV=IBM2SS 1.SYS (Socket Services)
BASEDEV=IBM2SS14.SYS (Socket Services)
BASEDEV=AUTODRV2.SYS (Auto Configurator)
DEVICE=C:\THINKPAD\VPCMCIA.SYS (Virtual Card Services)
:
DEVICE=C:\THINKPAD\xxxxxxx.SYS
:(↑ Storage card device driver)
REM PC_Card_Client_Device_Driver
:
DEVICE=C:\THINKPAD\$ICPMOS2.SYS
(↑ Power Management Support driver)
Appendix B. Advanced Information for PC Cards for OS/2 Warp 185
To Next Page
Loading...
