IBM ThinkPad 380 - Page 206

Adding to the CONFIG.SYS File
Rule 1 Card Services and Socket Services must be listed before
any other PCMCIA drivers.
Rule 2 The PCMCIA Power Management Support driver must be
listed after all drivers, at the end of the CONFIG.SYS file.
Rule 3 When using storage cards, the device drivers must be
installed according to the card type:
Using only an ATA card:
:
BASEDEV=PCM2ATA.ADD /!DM (ATA card device driver)
DEVICE=C:\THINKPAD\PCMSSDIF.SYS
:(↑ Storage API device driver)
BASEDEV=OS2PCARD.DMD (Storage Card Device Manager)
Using an ATA card and an SRAM card:
:
BASEDEV=PCM2ATA.ADD /!DM (ATA card device driver)
DEVICE=C:\THINKPAD\PCMSSDIF.SYS
(↑ Storage API device driver)
DEVICE=C:\THINKPAD\PCM2SRAM.SYS
:(↑ SRAM card device driver)
BASEDEV=OS2PCARD.DMD (Storage Card Device Manager)
186 IBM ThinkPad 380 or 380D User's Guide