IBM ThinkPad 380 - Using Easy-Setup

Using Easy-Setup
Using Easy-Setup
The computer has a built-in system setup function called
Easy-Setup . Easy-Setup allows you to set the date and time,
password, the startup sequence of the drives, and shows hardware
configurations. Easy-Setup also runs the diagnostics.
Starting Easy-Setup
To start Easy-Setup:
1 Turn off the computer.
2 Remove any diskette from the diskette drive.
Note:
You can change the screen color of
the Easy-Setup menu with the key
combinations of Ctrl+PgUp or
Ctrl+PgDn. Use Ctrl+Home to
restore the original screen color.
Enter your password if you are using
passwords.
3 Press and hold F1; then turn on the computer. Hold F1 until
the Easy-Setup menu appears.
Date/Time Password
Easy-Setup
Startup
Test
Restart
Config
BIOS part number,..Date
System-unit serial number
System board serial number
Microprocessor
nnnnnnnnnnnnnnnn
nnnnnnnnnnn
Pentium( )Process
**
nnnnnnn
12/31/96
Chapter 3. Operating Your Computer 33