Using Easy-Setup
To select an item from the Easy-Setup menu, move the pointer with
a pointing device to the item and click on the item or use the
keyboard as follows:
The arrow keys (↑↓←→ ) highlights the item from the menu.
The spacebar selects the item.
The enter key enters the next menu, or saves the changes and
exits the menu.
The Esc key returns to the previous menu, or cancels the
changes.
Config
Config contains the following:
Memory
SystemBoard
Initialize
Exit
Memory
Memory shows the amount of installed memory and available
memory.
SystemBoard
SystemBoard provides information about the installed system
board.
Initialize
Initialize sets all items that have been changed back to their default
values.
After verifying your selections, click on OK or press Enter.To
cancel the selections, press Esc.
34 IBM ThinkPad 380 or 380D User's Guide
To Next Page
Loading...
