IBM ThinkPad 600 Hardware Maintenance Manual

FRU Replacement Notices
4. Press Ctrl + G. The UUID menu appears.
5. Press F5 to generate a new UUID, and press Enter
to overwrite it to EEPROM.
CPU Card Replacement Notice (600E
and 770X Only)
You must restore the CPU card serial number to its
original number, when the CPU card is replaced. To save
and restore the CPU card serial number, follow the
instruction in “Serial Numbers” on page 20.
DC-DC Card Replacement Notice (770X
Only)
You must restore the DC-DC card serial number to its
original number, when the DC-DC card is replaced. To
save and restore the DC-DC card serial number, follow the
instruction in “Serial Numbers” on page 20.
22

IBM ThinkPad 600 Specifications

General

Processor	Intel Pentium II
Graphics	Neomagic MagicGraph128XD
Operating System	Windows 95, Windows 98, or Windows NT 4.0
Resolution	800 x 600
Battery	Lithium-Ion
Optical Drive	Optional external CD-ROM drive
Ports	Serial, Parallel, VGA
Network	10/100 Ethernet
Clock Speed	233 MHz to 300 MHz
Display	12.1-inch TFT