Set the hard disk drive power management timer for the
specified number of minutes (
xx
):
AC: Set the timer when the AC Adapter is connected.
DC: Set the timer when using battery power.
Note: This command is effective on the current power
management mode set by the PM commands.
Set the LCD off timer for the specified number of minutes (
xx
):
AC: Set the timer when the AC Adapter is connected.
DC: Set the timer when using battery power.
Note: This command is effective on the current power
management mode set by the PM command.
Set the resume timer:
Note:
yyyy
can be set from 1980 to 2079.
Set the power management mode to enter by the automatic
power-saving timer:
Note: Create the hibernation file using the HFILE command
before using the TI H command.
Set the power management mode:
AC: Set the power management mode when the AC Adapter is
connected.
POwer
xx
[AC | DC]
DISK
xx
[AC | DC]
LCd
xx
[AC | DC]
ON [yyyy/MM/DD] HH:MM:SS | Clear —
TImer Suspend | Hibernation —
180 IBM ThinkPad 600E Online Book