EasyManuals Logo

IBS BatchControl CTR 210 User Manual

IBS BatchControl CTR 210
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
Safety informations
Safety informations
The CTR 210 has to be installed by process electronics engineers or qualified
electricians who are authorised by the plant operator to carry out these tasks.
Only staff trained and authorised by the plant operator are allowed for usage.
The CTR 210 is to be connected as specified in the electrical data. Do not open the
housing, otherwise maintenance of the electrical data is not ensured and the
guarantee expires immediately.
Validity of Installation and Operating Instructions
These Installation and Operating Instructions apply to all CTR 210 and BGI 210
models.
Your IBS agent will be able to give you information about any improvements or
modifications.
The manufacturer will not be liable for any defects caused by incorrect or
unauthorised usage. Modifications / Conversions or changes to the instrument will
expire the certification and guarantee.
Operating safety
The instruments are manufactured in our ISO certified factory. They comply with the
requirements laid down in this standard.
The CTR meets the requirements of protection class IP20.
It will be dangerous to use the instrument incorrectly or not authorised. All
information in this manual has to be adhered strictly.
Technical Developments
Modifications or changes to the technical data do not require a notice by the
manufacturer.
Repairs, dangerous chemicals
Only the IBS BatchControl GmbH is allowed to repair the instruments because the
intrinsically safe is at risk.
Instruments sent to IBS BatchControl GmbH for repair must have an attached fault
description.
Warning!
Please adhere to the following procedure before sending an instrument for repair:
Clean the instrument by removing all residues and deposits. Pay special attention to
the gasket grooves and crevices.
If to health dangerous materials are not completely removed the instrument will not
be accept for repair or the owner will have to pay for professional cleaning.
He will also be made responsible for any damage to health (e.g. acid burns, etc.) of
our personnel.
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the IBS BatchControl CTR 210 and is the answer not in the manual?

IBS BatchControl CTR 210 Specifications

General IconGeneral
BrandIBS BatchControl
ModelCTR 210
CategoryController
LanguageEnglish