Do you have a question about the iC-Haus iC-PV EVAL PV1M1 and is the answer not in the manual?
Category | Microcontrollers |
---|---|
Product Type | Evaluation Board |
Manufacturer | iC-Haus |
Model | iC-PV EVAL PV1M1 |
Microcontroller Type | iC-PV |
Operating Voltage | 3 V to 5.5 V |
Clock Speed | Up to 20 MHz |
Memory | Flash, RAM |
I/O Ports | Digital and Analog I/O |
Communication Interfaces | SPI, UART |
Details the items included in the evaluation kit, such as the PV1M1 module, battery, and magnet.
Details the pin assignment for the 10-pole BiSS connector (J2) used for PC adapter connection.
Details the pin assignments for the 10-pole ribbon connector that interfaces with the PV1M1 board.
Specifies the pinout for the 9-pole Sub-D connector that attaches to the PC-USB adapter.
Shows the fundamental circuit principle of the iC-PV and iC-MHM components and their interconnections.
Presents the complete circuit diagram of the PV1M1 board, including component layout and connections.