Need help?Do you have a question about the ICANCLAVE STE-23-D and is the answer not in the manual?
Contains information on installation, operation, and maintenance of steam sterilizers.
Specifies use in medical, dental, beauty, vet, and tattoo fields for various instrument loads compatible with steam.
Provides critical safety guidelines for installation and operation to prevent hazards.
Lists directives and standards the sterilizers comply with, ensuring safety and quality.
Explains alert symbols used for safe operation on the sterilizer and within the manual.
Diagrams labeling key components of the sterilizer with corresponding numbers for identification.
Identifies components of the control panel and their associated functions.
Details technical specifications like chamber size, dimensions, weight, power, and temperatures.
Lists items included in the packaging with their quantities for each model.
Specifies requirements for positioning, ventilation, and avoiding water splashes for safe installation.
Details how to connect the power cord, emphasizing voltage verification and grounded outlets.
Provides detailed dimensional requirements and layout considerations for installing the sterilizer.
Instructions on how to fill the distilled water tank, including low-level indicators and overflow alarms.
Guidance on attaching the drain hose to empty the used water tank.
Steps for cleaning, treating, and arranging instruments for effective sterilization.
Allows setting of date, time, and language options for the sterilizer.
Displays device information, software version, and serial number.
Enables setting of parameters, units, preheat, expiry date, and water quality.
Checks before starting operation, including switching on the unit and verifying screen icons.
Instructions for opening the door, placing trays inside, and closing the door.
Steps to navigate the menu, select a sterilization program, and view its details.
How to initiate the sterilization cycle and observe its progress on the display.
What to expect when the cycle completes, including 'End' display and printing/saving reports.
Procedure to stop a running cycle prematurely and its implications.
Details on performing Helix, B&D, and Vacuum tests for validation.
Procedure for conducting the Helix test using the appropriate device.
Procedure for conducting the B&D test with the specified package.
Steps for performing the vacuum test and interpreting leakage rate results.
Information on internal memory storage for cycle history.
How to use a USB drive for storing cycle reports and file naming conventions.
Information on the printer status icon and its function for printing reports.
Accessing and saving cycle records stored in the internal memory.
Instructions to select cycle numbers and print labels for identification.
Step-by-step guide for draining, cleaning the tank interior, and cleaning the filter.
Procedure for unscrewing the old filter and screwing in the new one.
Steps for cleaning chamber interior, trays, rack, and examining the door seal.
How to adjust the door if the seal fails, ensuring proper closure.
Detailed steps for removing the old seal, cleaning, and inserting the new door seal ring.
Instructions on how to press, pull, and push the drain valve for draining the tank.
Table listing error codes with descriptions and proposed solutions for diagnosing issues.
Specifies temperature, humidity, and atmospheric pressure requirements for safe transport and storage.
Protection against heating resistor failures by interrupting power supply.
Protection against short circuits and transformer overheating.
Protects against chamber over-pressure by releasing steam.
Ensures correct door closing position and signals errors.
Prevents overheating of chamber resistors by interrupting power.
Prevents overheating of steam generator resistors by interrupting power.
Prevents accidental door opening during the program cycle.
Restores atmospheric pressure after cycle interruption, alarm, or blackout.
Details the required specifications for feed water, including residue, metals, conductivity, and pH.
Shows the characteristics of condensate water, including residue, metals, conductivity, and pH.
Table listing sterilization programs (SOLID, WRAPPED, TEXTILE, PRION, LIQUID) with parameters for STE-8-D.
Table listing sterilization programs with parameters for STE-12-D.
Table listing sterilization programs with parameters for STE-18-D.
Table listing sterilization programs with parameters for STE-23-D.
Table listing sterilization programs with parameters for STE-29-D.
General| Brand | ICANCLAVE |
|---|---|
| Model | STE-23-D |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
