Need help?Do you have a question about the ICANCLAVE STE-8-D and is the answer not in the manual?
General| Type | Autoclave |
|---|---|
| Model | STE-8-D |
| Capacity | 8 liters |
| Power Consumption | 1.5KW |
| Material | Stainless Steel |
| Voltage | 220V |
| Pressure Range | 0.10 - 0.23 MPa |
| Power Supply | AC 220V, 50/60Hz |
| Sterilization Time | 4-60 minutes |
| Sterilization Temperature Range | 121°C to 134°C |
Specifies the medical, dental, and beauty fields for which the steam sterilizer is designed.
Provides essential safety guidelines and precautions for operating the steam sterilizer.
Specifies the environmental and placement requirements for installing the sterilizer.
Guides on correctly connecting the sterilizer to an appropriate power source.
Instructions for filling the distilled water tank to the correct level.
Guidelines for preparing instruments and materials for effective sterilization.
Allows adjustment of sterilization parameters like holding time and dry time.
Retrieves information about the most recent error for technical assistance.
Instructions for loading trays and instruments into the sterilization chamber.
Guide to choosing and confirming the appropriate sterilization program.
Procedure to initiate the selected sterilization cycle.
Details on performing diagnostic tests like Helix, B&D, and Vacuum tests.
Instructions on how to replace the sterilizer's bacteriological filter.
Details common error codes, their descriptions, and proposed solutions for troubleshooting the sterilizer.
Details various safety devices integrated into the sterilizer and their specific functions and actions.
To Next Page
