ICC CAT 5e - User Manual

To Next Page

ICC’s Category 5e Data Module is an 8-port network interface solution. The module is designed and engineered with

110-type IDC connectors to provide secure terminated wiring and meets or exceeds TIA performance standards. It supports

up to eight data lines local area network applications such as cable or DSL services.

Category 5e Data Module

ICRESDPA2U - Single

Assembly Instructions

Find a at, clean surface and press rmly on the module to adhere to

the desired surface.

Step 1 Step 2

Peel o󰀨 lm backing from each of the self-adhesive.

ICRESDPA2W - 10-Pack

8-Port CAT 5e Data Module, 1 pieceA

Universal Mount, 1 piece

8-Port CAT 5e Data Module, 10 pieces

Universal Mount, 10 pieces

Email us: cs@icc.com • Go online: icc.com

MSR-0432-5 Rev B

8-Port CAT 5e Data Module with Universal Mount

INSTALLATION INSTRUCTIONS

Need help?

Do you have a question about the ICC CAT 5e and is the answer not in the manual?

Summary

Details single unit (ICRESDPA2U) and 10-pack (ICRESDPA2W) configurations for the 8-port CAT 5e module.

An 8-port network interface using 110-type IDC connectors, supporting local area network applications.

Peel off the protective film backing from the self-adhesive side of the module.

Press the module firmly onto a flat, clean surface to ensure proper adhesion.

Terminate wires using a 110 punch-down tool following TIA-568-A color coding for residential installations.

Illustrates module setup for 8 locations, connecting to PCs, modems, and routers via patch cords.

Explanation of TIA-568-A for phone applications, utilizing pairs 1 and 2 for up to two lines.

General