EasyManua.ls Logo

ICE AIR Console Water Source Heat Pump - User Manual

ICE AIR Console Water Source Heat Pump
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Console Water Source Heat Pump (WSHP)
OPERATING & MAINTENANCE MANUAL
World class comfort.

Questions and Answers

  • J
    Jessica RichardJul 29, 2025
    What to do if my ICE AIR Heat Pump unit is not operating?
    • M
      Mr. Jason DanielsJul 29, 2025
      If your ICE AIR Heat Pump unit isn't operating, there are several things you can check: - First, ensure the unit hasn't been turned off by the thermostat. - Check the electrical connections, voltage, and current against the unit's nameplate specifications. - Look for any wiring errors or loose screw connections. - Verify the water supply piping is properly connected and that the filters are clean. - Confirm the indoor fan is working correctly. - Check for any fault codes on the control board and consult the troubleshooting guide. If a flashing “A” appears on the display, or if these steps don't resolve the issue after a reset, it is recommended to contact a trained service technician for further diagnostics and repair.

Summary

General Information and Safety

Consumer Safety and Operating Notes

Essential safety and operating guidelines for optimal unit enjoyment and user protection.

Electrical and Technical Specifications

Electrical Data Requirements

Details on voltage, phase, wiring, and circuit protection for proper unit electrical connection.

Controls and Operation

Operating Instructions and Sequence

Details on accessing and using the standard digital controls for unit operation.

Unit Operation Modes

Normal, Cool, Heat, and Auto Modes

Guides on how to activate and use the different operating modes of the WSHP unit.

Maintenance and Cleaning

Component Specifics and Troubleshooting

Safety Warnings

Installation and Operation Safety

Critical safety warnings regarding installation, servicing, electrical hazards, and proper unit operation.

ICE AIR Console Water Source Heat Pump Specifications

General IconGeneral
Frequency60 Hz
TypeWater Source Heat Pump
RefrigerantR410A
Phase1
Operating Temperature Range (Heating)40-90°F

Related product manuals