ICE AIR ELA-8842 Installation Manual

ICE AIR ELA-8842

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

CHPW

Slope or Flat Top

Console Unit

Water Source Heat Pump

(WSHP) Unit

ELA-8842

Installation Manual

Other manuals for ICE AIR ELA-8842

User Guide2 pages

Questions and Answers:

D
Dawn McdanielAug 12, 2025
What to do if my ICE AIR Heat Pump is not operating?
- K
  Katelyn DennisAug 12, 2025
  If your ICE AIR Heat Pump isn't working, start by checking the electrical connections and verifying the voltage and current against the unit's nameplate. Inspect for wiring errors and ensure all screw connections are tight, both in line and low voltage terminals. Also, check the water supply piping, filters, and indoor fan. Confirm the thermostat settings are correct and look for any fault codes on the control board.
N
nriversAug 16, 2025
What to do if my ICE AIR ELA-8842 shows high pressure?
- B
  bryantandreaAug 16, 2025
  If your ICE AIR Heat Pump indicates high pressure, this could be due to low or no water flow, a dirty coax coil, a blockage in the cap tube, or the entering water temperature being too high. Check the corresponding issues as per the fault codes.
N
Nicholas FullerAug 20, 2025
What causes low pressure in my ICE AIR ELA-8842?
- R
  Robert CookeAug 20, 2025
  Low pressure in your ICE AIR Heat Pump can be attributed to a low charge, a dirty filter, or a dirty evaporator coil. Check the corresponding issues as per the fault codes to resolve it.

ICE AIR ELA-8842 Specifications

General

Brand	ICE AIR
Model	ELA-8842
Category	Heat Pump
Language	English

Related product manuals

Preview: Console Water Source Heat Pump

Console Water Source Heat Pump

ICE AIR 5CHPW13

ICE AIR 8CHPW13-ZS