Need help?Do you have a question about the Ice-O-Matic CIM2046 and is the answer not in the manual?
Discusses the machine's energy-saving features and ENERGY STAR partnership.
Guidance on effectively utilizing the service manual for installation and maintenance.
Specifies the ideal temperature range for optimal machine performance.
Details requirements for water pressure, temperature, and type.
Recommendations for water quality and filtration systems.
Guidelines for proper drain line installation and routing.
Specifies necessary space around the unit for ventilation and service.
Information on voltage, circuit requirements, and wiring.
Procedures for leveling and component adjustments during installation.
Criteria for placing the remote condenser unit.
Instructions for installing refrigerant lines.
Demonstrates how to calculate line set length for optimal performance.
Connection details for air-cooled models.
Connection details for water/remote-cooled models.
Method for adjusting ice slab thickness for optimal harvest.
Describes the initial state and LED indicators when the unit is off.
Details the process and component activation during the freeze cycle.
Explains the steps involved in energizing the compressor.
Describes the initial cooling phase before freezing.
Details the water pump activation during the freeze cycle.
Explains the mechanism to prevent slush formation.
Describes the water pump operation after anti-slush.
Details the steps leading to the start of the harvest cycle.
Explains the process of harvesting ice.
Describes the transition back to the freeze cycle.
Explains the shutdown condition when the ice bin is full.
Explains the meaning of different LED flash patterns.
Identifies and explains common error conditions and their indicators.
Specifies operational time limits for various cycles.
Describes configuration options via dip switches.
Details connections for switches and the control board.
Explains the thermistor connection for temperature sensing.
Describes the function of individual relays controlling components.
Details connections for line voltage components.
Describes the functionality of the unit's buttons.
Sequence of LED indications during the first freeze cycle.
LED indicators during the initial harvest cycle.
LED status during the cycle transition.
LED indications when the bin is full.
LED sequences for freeze cycle diagnostics.
LED sequences for harvest cycle diagnostics.
Step-by-step guide for removing the sump on specific models.
Instructions for removing the sump from 48-inch models.
Description of the assembly containing float switches and thermistor.
Guidance for diagnosing and resolving issues with float switches.
Explains how to adjust the ice bridge thickness using the float housing.
Explains the function and activation of the water pump.
Procedure for safely removing and reinstalling the water pump.
Steps for taking apart and cleaning the water distribution tube.
Describes the valve's function in filling the sump.
Explains the valve's role during harvest and cleaning cycles.
Describes the function of the harvest assist during ice release.
Guidance for resolving issues with the curtain switch detection.
Details the safety function of the high-pressure cut-out switch.
Explains the fan's operation based on head pressure.
Describes how the fan motor is powered and controlled.
Explains how the evaporator functions during the freeze cycle.
Procedures for replacing single evaporator plates.
Guidance for diagnosing issues with the high-temperature safety switch.
Overview of the system's refrigeration components and their function.
Details the function and troubleshooting of the TXV.
Explains the role of the hot gas valve and its troubleshooting.
Describes the solenoid valve for remote systems.
Explains the function and troubleshooting of the mixing valve.
Recommended routine maintenance tasks and schedule.
Step-by-step guide for removing mineral deposits.
Procedure for disinfecting the ice machine.
Guidelines for maintaining the exterior surfaces.
General| Weight | 240 lbs |
|---|---|
| Ice Type | Cube |
| Condenser Type | Air-Cooled |
| Width | 48 inches |
| Type | Modular Cube Ice Machine |
| Ice Cube Size | 3/4 inch |
| Ice Storage Capacity | External Bin Required |
| Storage Capacity | External Bin Required |
| Refrigerant | R404A |
To Next Page