Need help?Do you have a question about the Ice-O-Matic EF Series and is the answer not in the manual?
Instructions on how to use the manual and important safety warnings for operation.
Details model/serial number formats, electrical, and mechanical specifications.
Guidelines for installation, including ambient conditions, water supply, and connection diagrams.
Covers ambient operating temperatures, airflow, and limitations for remote condenser line sets.
Outlines parts and labor coverage for various ICE-O-Matic products and warranty limitations.
Procedures for filing warranty claims and the governing legal framework.
Explains the step-by-step process of water filling, freezing, and ice production.
A 6-month maintenance checklist covering float reservoir, water level, condenser, leaks, controls, and belt.
Detailed steps for cleaning and sanitizing the ice machine using approved cleaners and sanitizers.
Steps to prepare the ice machine for winter storage to prevent damage and voided warranties.
Guidelines for cleaning and maintaining stainless steel surfaces to prevent rust and corrosion.
Explains how to navigate the troubleshooting flowcharts and identify potential issues.
Diagnoses problems like no ice, slow production, or wet ice.
Troubleshoots why the machine fails to start, run, or has auger seizing.
Addresses issues like high suction pressure, auger motor fluctuations, and leaks.
Explains the function of the float valve and reservoir in maintaining water level.
Details the water seal and O-ring, their function, and common problems.
Covers the auger drive motor, V-belt, gear reducer, and coupler function.
Explains evaporator disassembly, inspection, and replacement of bearings, seals, and O-rings.
Covers the refrigeration cycle, components, and key operating pressures for various models.
Explains condenser types, expansion valve function, and diagnostic steps.
Procedures for proper system evacuation, charging, and safe refrigerant handling.
Covers control circuits, selector switch, compressor, safety, and bin controls.
Details the auger motor, its protection, and related relays.
Presents detailed electrical wiring diagrams for various EF/EMF series ice machine models.
General| Model | EF Series |
|---|---|
| Amperage | Varies by model |
| Ice Type | Cube |
| Width | Varies by model |
| Depth | Varies by model |
| Height | Varies by model |
| Power Supply | Varies by model |
| Weight | Varies by model |
| Cooling | Air-cooled or water-cooled (varies by model) |
| Refrigerant | R404A |
| Condenser Type | Air-cooled or Water-cooled (depending on the specific model) |
| Storage Capacity | Varies by model |
| Dimensions (H x W x D) | Varies by model |
| Ice Production | Up to 1000 lbs per day (depending on the specific model) |
To Next Page