Need help?Do you have a question about the Ice-O-Matic ICEF 155 and is the answer not in the manual?
Details model, finish, capacity, and electrical data for the ice maker.
Covers requirements for connecting the unit to power safely.
Explains how to connect water lines and drains correctly.
A comprehensive list of checks before operating the unit.
Step-by-step guide to initiate the ice maker's operation.
Procedures to verify correct functioning after initial setup.
Steps for replacing the main control board.
Replacing key internal components of the auger assembly.
Procedure for replacing the refrigerant drier.
Steps to replace the main freezing cylinder.
How to replace the air-cooled condenser.
How to replace the water-cooled condenser.
Machine fails to start, no LEDs illuminated due to fuse or connection issues.
Indicator shows full bin, but no ice, likely due to ice level sensor issue.
Indicates water shortage or poor water quality affecting operation.
Signals high head pressure or ambient temperature issues.
Indicates high evaporator temperature or refrigerant issues.
Signifies gear motor running backward or too slow.
Motor operates intermittently, check capacitor or sensor.
Indicates an inoperative condenser sensor.
Signals an inoperative evaporator sensor.
General| Model | ICEF 155 |
|---|---|
| Type | Ice Maker |
| Ice Type | Nugget |
| Condenser Type | Air-Cooled |
| Voltage | 115V |
| Refrigerant | R404A |
| Power Supply | 115V/60Hz |
To Next Page