Need help?Do you have a question about the Icematic N 132M and is the answer not in the manual?
Crucial safety note emphasizing professional installation for all connections.
Description of the freezing cycle, components involved, LED status, and water system operation.
Details on the components operating during the harvest cycle and the process of ice release.
Explains the refrigeration system's function during the freezing cycle, including compressor, condenser, and expansion valve.
Describes the water system, including solenoid valve, water level sensor, pump, and spray tube for ice formation.
Details how the hot gas bypass valve is used to melt ice and release cubes during harvest.
Describes the sequence of operations controlled by the magnetic switch and ice sensor for cycle transitions.
Lists various alarm conditions indicated by LED patterns and their possible causes.
Provides operating data for air-cooled and water-cooled models, including pressures, amps, and cycle times.
Details the function and configuration options of the electronic control board.
Explains how the ice thickness sensor detects ice formation and signals for defrost.
Details the function of the hot gas solenoid valve during the harvest cycle for ice release.
Schematic diagram illustrating electrical connections for N202M, N302M, and N402M models.
Schematic diagram illustrating electrical connections for the N502M model.
Recommended maintenance schedule and procedures for the icemaker unit.
Detailed steps for cleaning the icemaker using citric acid solution.
To Next Page
General
