Need help?Do you have a question about the Icematic N140 and is the answer not in the manual?
Explains the process of ice cube formation, water level control, cube size regulation, and cube harvest.
Describes the electrical supply requirements and the basic refrigeration system components used in the "N" series machines.
Lists possible causes and corrections for the icemaker not starting.
Addresses issues where the machine operates but does not produce ice, providing potential causes and solutions.
Covers troubleshooting for reduced ice production, including causes like gas issues, dirty components, and environmental factors.
Solutions for icemaker issues resulting in small or insufficient ice cubes.
Troubleshooting steps for when ice cubes are too large or elongated.
Addresses issues related to the shape and size consistency of the ice cubes.
Explains causes like impure or calcareous water leading to deposits in the pan.
Covers troubleshooting for water leakage issues.
Provides a schedule for annual maintenance and cleaning procedures to ensure optimal performance and longevity.
Details the step-by-step process for thoroughly cleaning the icemaker components, including the evaporator and storage bin.
Step-by-step guide for safely replacing the compressor unit.
Procedure for removing and installing a new air-cooled condenser.
Instructions on how to replace the refrigerant drier.
Guide for replacing the fan motor assembly.
To Next Page
General
