Need help?Do you have a question about the IceTech KG30 SUPREME and is the answer not in the manual?
General| Brand | IceTech |
|---|---|
| Model | KG30 SUPREME |
| Category | Shot Blasting Machines |
| Language | English |
Combines dry and thermal cleaning for efficient results.
Leaves no residue, simplifying post-cleaning.
How the dry ice blasting process works.
General instructions and safety regulations for operation.
Requirements for personnel operating and servicing the machine.
Machine compliance with standards and operator safety.
Specific safety measures to follow during the blasting process.
Warnings and precautions regarding static electricity discharge.
Warning against use if wearing a pacemaker.
Precautions in environments with explosion risks.
Risks and precautions related to skin contact with dry ice.
Recommendations for protection against dust during cleaning.
Reiterates precautions for skin contact with dry ice.
Recommends CO2 detector use in certain areas.
Information on CO2 hazards and ventilation needs.
Labelled diagram of the machine's control panel.
Labelled diagram of the blasting hose.
Labelled diagram of the IceGun HD.
Identification of the control box.
Notes on using cabinet handles for maneuvering.
Details on the static ground cable.
Function of the power switch and consumption indicator.
Emergency stop button and pressure gauges.
Control for adjusting air pressure and warning symbols.
Connection points for hose and signal cable.
Function of the safety switch and description of the nozzle.
Operation of the two-step trigger.
Function of the light on the gun.
Operation of the two-step trigger and standard nozzle.
Steps for preparing the machine before operation.
Procedure for starting the machine and the blasting process.
Verifying machine status and connecting ground cable.
Procedure for activating the trigger for system check.
How to fill the hopper and adjust settings.
Final steps to begin the blasting operation.
Steps to safely shut down the machine after use.
Specific order for disconnecting cables and hoses.
Steps to follow after activating the emergency stop button.
Safety guidelines for connecting and disconnecting the hose.
Actions to take if a blasting hose is found defective.
Information on power connection and the OFF button.
Daily checks before operating the machine.
Maintenance tasks after 100 hours of use.
Maintenance tasks after 500 hours of use.
Parts that can be repaired by qualified personnel.
Conditions and guidelines for warranty compliance.
Guidance on selecting nozzles based on pattern and consumption.
Characteristics of small and wide blast patterns.
Importance of selecting the correct nozzle size.
Table detailing air consumption rates.
How to interpret and use the air consumption table.
Technical specifications for the KG30 3/4" model.
Electrical power requirements for the machine.
Information on noise levels produced by the machine.
Technical specifications for the KG50 3/4" model.
Technical specifications for the KG50 1" model.
Index of spare parts for various KG30 models.
Spare parts for KG30 cabinet and control panel.
Spare parts for KG30 hopper, bottom, dosing, and pneumatic units.
Index of spare parts for KG50 3/4" models.
Index of spare parts for KG50 1" models.
Spare parts for KG50 cabinet and control panel.
Spare parts for KG50 hopper, bottom, dosing, and pneumatic units.
Spare parts for 3/4" blasting hoses.
Spare parts for 1" blasting hoses.
Spare parts and description for IceGun HD 3/4" with light.
Spare parts and description for IceGun HD 3/4" without light.
Spare parts and description for IceGun HD 1" with light.
Spare parts and description for IceGun HD 1" without light.
To Next Page
