icetro IFI-770N User Manual

FLAKE ICE MAKER
USER MANUAL
MODEL : IFI-770F, N / IFI-770WF, WN
※ This machine cannot be used in any other country where the electric voltage
for its power supply is not available.
※ This product is designed for indoor installation.
Please be sure to install it indoors.
※ The external appearance, design, color, and/or components of this machine
may be changed without prior notice for the sake of the Company's product
manufacture.
※ For maximum hygiene, be sure to clean and sterilize the product
on a daily basis.

icetro IFI-770N Specifications

General

Brand	icetro
Model	IFI-770N
Category	Ice Maker
Language	English

Summary

Preparations for safety

Electrical Safety: Receptacles and Plugs

Use single receptacle, clean plug, ensure tight connections for electrical safety.

Physical and Environmental Safety

Avoid heavy items, moisture, flammable gas, and follow emergency shutdown.

Handling and Disassembly Safety

Avoid disassembly, touching with wet hands, and use proper tools.

Power Disconnection and Grounding

Proper procedures for disconnecting power and grounding the unit.

Installation and Power Strip Safety

Guidelines for lifting product and using adequate power strips.

Ground Handling and Waiting Period

Specifications

Installation - Suitable Condition and Place

Places without heat source

Spaces from walls

On even surfaces

Installation - Suitable Condition and Place (Continued)

Clean and hygienic places

Indoor installation

Inaccessible to children

Installation - Storage Bin and Ice Maker

How to install the storage bin

Installing the ice maker and connecting storage bin

Procedures for lifting and placing the ice maker onto the storage bin.

Installation - Connecting Water Hoses

Water inlet and outlet hose specifications

Details on appropriate temperatures, pressures, and connecting parts for hoses.

Air cooled vs. Water cooled type hose connections

Drain hose connection guidelines

Installation - Grounding

Grounding method with terminal

Connecting to a standard grounded outlet.

Grounding method without terminal

Connecting to copper plate and burying for grounding.

Prohibited grounding points

After Installation - Initial Setup

Appropriate operating conditions

Connecting potable water supply

Connect only to a potable water supply.

Plugging into power supply

Operate only on rating volts and plug into a suitable outlet.

Supplying water to the icemaker

Ice making process

Starting the Product - Power On

Set circuit breaker to OFF

Set front power switch to OFF

Plug into power outlet

Insert the plug into a power outlet matching requirements.

Set circuit breaker to ON

Starting the Product - Operation Modes

Ice Making Mode

Set the front switch to 'ICE' to start ice production.

Water Outlet (Evaporator) Mode

Starting the Product - Stopping

Stopping the product

Set the front power switch to 'OFF' to stop the product.

Product Status Indication Lamp Guide

TEMP. ERROR LAMP (RED)

MOTOR ERROR LAMP (RED)

TEMP. AND MOTOR LAMP (RED)

All Lamps Blinking

Prevent Freezing and Bursting - Evaporator

Remove water from supply tank and evaporator

Steps to drain water to prevent freezing and bursting during non-use.

Prevent Freezing and Bursting - Condenser

Remove water from condenser (Water Cooled Type)

Procedures for draining water from the condenser for water-cooled models.

Maintenance, Clearing, and Sterilizing

Maintenance Schedule

Cleaning and Sterilizing

Cleaning Solution Preparation

Cleaning Procedure

Detailed steps for cleaning the ice maker, including draining and rinsing.

Cleaning and Sterilizing (Continued)

Sterilizing Solution Preparation

Sterilization Procedure - Early Steps

Steps for initial sterilization, including disassembling parts.

Sterilization Procedure - Last Steps

Final sterilization steps, including reassembly and running the unit.

Error Type

Before Contacting Manufacturer