Need help?Do you have a question about the icetro IM-0750-AH/C and is the answer not in the manual?
Guides on how to test the water level sensor for proper functionality and identify errors.
Procedures for testing the float switch and its wiring harness for continuity.
Lists possible causes for error codes 1 and 3 related to evaporator temperature.
Identifies potential issues leading to error code 11, concerning ice thickness sensing.
Outlines potential reasons for error code 15, indicating the high-level water sensor is not detected.
General| Condenser | Air-cooled |
|---|---|
| Ice Type | Cube |
| Type | Modular |
| Material | Stainless Steel |
| Color | Silver |
| Production | 750 lbs per day |
| Ice Production | 750 lbs/day |
| Ice Storage Capacity | Not applicable |
| Water Tank Capacity | Not applicable |
| Power Consumption | 5.4 kWh per 100 lbs of ice |
| Voltage | 220-240 V, 50/60 Hz |
To Next Page