Need help?Do you have a question about the icetro ISI-271SHS and is the answer not in the manual?
Explains Danger, Warning, Caution levels and interprets safety symbols used.
Covers safe installation, electrical handling, operation, and placement guidelines.
Details fire/electrical hazard prevention, handling of materials, and forbidden actions.
Steps for safely unpacking the machine and checking for completeness.
Guidelines for choosing a safe installation location and avoiding hazards.
Instructions for connecting the water supply line and checking pressure.
Details on electrical connections, grounding, and spacing requirements.
Procedure to enter administrator mode and define the machine model.
Configuration of pasteurization, its maintenance, and warning settings.
Steps for preparing and loading ingredients into the machine.
How to start the ice cream production process using AUTO mode.
Detailed steps for performing pasteurization using the HEATING button and AUTO mode.
Safety warnings for servicing the unit and handling refrigerant lines.
Warnings and procedures for repairing refrigeration circuits, including leak detection.
Precautions for handling POE oils, installing driers, and brazing.
Steps for safely recovering and storing refrigerant.
Safety guidelines for brazing, including material hazards and leak testing methods.
Detailed steps for vacuuming the system and recharging with refrigerant.
Warnings about drier replacement, POE oil absorption, and service time limits.
Step-by-step instructions for removing and replacing the compressor.
Steps for removing and replacing the capillary tube, including related component service.
Notes on using correct tube diameter and replacing strainers.
Steps for removing and replacing hot gas or liquid line valves.
Warnings about drier replacement and brazing protection during condenser service.
Step-by-step instructions for removing and replacing the condenser and fan motor.
Checks for power, ELB, and ventilation issues when the machine doesn't operate.
Troubleshooting thin ice cream, noise, cup rising, and dose issues.
Addresses problems with too much or too little ice cream ejection.
Lists common error codes related to sensors, motors, and power, with corrective actions.
Lists error codes related to dispensing, sensors, and internal components with solutions.
Covers error codes related to dispensing, communication, and inverter issues.
General| Brand | icetro |
|---|---|
| Model | ISI-271SHS |
| Category | Ice Cream Maker |
| Language | English |
To Next Page
