Need help?Do you have a question about the icetro ISI-161TH and is the answer not in the manual?
General| Voltage | 220-240V |
|---|---|
| Refrigerant | R404A |
| Freezing Cylinder Capacity | 1.6 Liters |
| Type | Soft serve ice cream maker |
| Capacity | 16 Liters per hour |
Easy installation due to compact and slim body design.
High efficiency, low noise motor for quiet operation.
Artificial intelligence control for optimal cooling.
Low-temperature pasteurization for sanitary products.
Separate speed controls for taste and texture optimization.
Identifies key parts visible from the front, including dimensions.
Shows left and right side views with dimensions.
Displays operation status like ice cream level and break time.
Controls settings, locking/unlocking, and selection.
Buttons for PASTEURIZE, STAND-BY, MIX-LOW, etc.
Buttons to stop all functions or start ice cream production.
Details current level, setup, and load for making ice cream.
Shows hopper and cylinder temperatures.
Restores shape by liquidizing and reheating soft ice cream.
Melts soft ice cream in the cylinder.
Operates impeller and dasher for cleaning.
Explains pasteurization process, temperature settings, and cooling.
Details hopper and cylinder standby cooling after pasteurization.
Shows current temperature settings for hopper and cylinder.
Displays rated voltage, frequency, and current.
Shows no-load current for the dasher motor in different states.
Displays success/fail counts for sterilization and washing.
Shows the total count of errors encountered.
Adjusts target current for soft ice cream strength.
Adjusts cooling temperature for ingredients in the hopper.
Advises on choosing a suitable location and avoiding hazards.
Instructions for connecting the feed water line and checking water pressure.
Steps for connecting power, installing breaker, and grounding.
Steps to assemble the dasher lug (blades) and insert into the cylinder.
Guides on greasing, inserting piston, shaft, and tightening bolts.
Checks for phase error, ELB, and switch status.
Checks carburetor insertion, regeneration, and ingredient settings.
Adjusting discharge, MIX LOW lamp, carburetor hole, and ice cream level.
Familiarization, carburetor hole size, defrosting, and discharge amount.
Lists major components of the freezer assembly like CSR box, capacitor bracket, etc.
Lists parts of the drum assembly including agitator, carburetor, sensors, and motors.
Lists parts related to the foam assembly like piston, packing, levers, and shafts.
Lists components of the button display, including panels, PCBs, and speakers.
Details conditions for free repair within the warranty period.
Lists conditions for paid repair after warranty expiry or exclusions.
To Next Page
