09
1. To use the seat unit in
carrycot mode, discon-
nect the two clips locat-
ed at the bottom of the
seat unit, and loosen the
toggle at the top. Push
the fabric downwards
from the inside to en-
sure it lies flat.
2. To convert carrycot
to seat unit, connect the
two clips located at the
bottom of the carrycot/
seat unit
3. Tighten the tog-
gle located on the
top of the carrycot/
seat unit. Ensure that
all fabrics and buckles
are secure before use.
Assembly - Converting Carrycot to Seat
Operating the Brakes
1. To engage the brake, apply
a light downward pressure to
the brake lever. Ensure that the
brakes have been applied cor-
rectly and that the stroller will
not move.
2. To release the breakes, gently
lift up the brake lever.
To Next Page
Loading...
