Icom DS-100 (#02) - MB-75 (OPTION)

offered by Busse-Yachtshop.com
27
9
MB-75 (OPTION)
■ MB-75 FLUSH MOUNT KIT
The MB-75 is used to mount the DS-100 DSC CON-
TROLLER flush to a flat surface such as an instrument panel.
• Supplied accessories
Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 set
• Instructions
q Using the template (p. 29), carefully cut a hole into the in-
strument panel (or wherever you plan to mount the con-
troller) and slide the controller through the hole on the rear
panel.
w Attach the 2 supplied bolts on either side of the DS-100
(See next page.)
DS-100#02-(2) 01.12.13 10:53 AM Page 27 (1,1)