Need help?Do you have a question about the Icom IC-38A VHF FM and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-38A VHF FM |
| Category | Transceiver |
| Language | English |
General specifications including frequency coverage, resolution, and power.
Transmitter specifications: output power, emission mode, and deviation.
Receiver specifications: system, selectivity, and sensitivity.
Describes the functions of the front panel controls and indicators.
Explains the various indicators and displays on the LCD readout.
Instructions for installing the transceiver in a vehicle.
Instructions for setting up the transceiver as a fixed station.
Details on connecting the transceiver for fixed station use.
Step-by-step guide to basic transceiver operations.
Procedures for powering on, adjusting volume, and setting squelch.
How to select operating frequencies using controls or microphone.
Steps for transmitting, including PTT, speaking, and releasing.
Instructions for using the memory mode for storing frequencies.
Procedure for storing frequencies and settings into memory channels.
How to use frequency and memory channel scanning functions.
Procedure for scanning the entire frequency range for signals.
Procedure for scanning through programmed memory channels.
Explains duplex mode for repeater operation.
Steps to program transmit offset for duplex operation.
How to set subaudible tone frequencies for repeater access.
Procedure to reset the transceiver's microcomputer.
To Next Page
