CE Versions of the IC-F410/S which display the
“CE” symbol on the serial number seal, comply with
the essential requirements of the European Radio
and Telecommunication Terminal Directive
1999/5/EC.
<Intended Country of Use>
■■ GER ■■ NED ■■ ITA
■■ AUT ■■ BEL ■■ GRE
■■ GBR ■■ LUX ■■ SWE
■■ IRL ■■ ESP ■■ DEN
■■ FRA ■■ POR ■■ FIN
56-#57,58,59/ 67-#58 A-5458D-5EU
INSTALLATION NOTES
The installation of this equipment should be made in such a manner
as to respect the EC recommended electromagnetic field exposure
limits (1999/519/EC).
The maximum RF power available from this device is 25 watts. For
vehicle installations it is recommended that the antenna be positioned
on the roof, centrally if possible. The roof will permit the antenna to
operate more efficiently as well as screen the occupants from exces-
sive electromagnetic fields. Boot mount or on-glass antenna are best
avoided. The transmitter should neither be continuously operated for
long periods if any person is within a distance of 2 metres of the an-
tenna, nor operated at all if any person is touching the antenna.
In all cases any possible risk depends on the transmitter being acti-
vated for long periods. (actual recommendation limits are specified
as an average of 6 minutes) Normally the transmitter is not active for
long periods of time. Some radio licenses will require that a timer cir-
cuit automatically cuts the transmitter after 1–2 minutes etc.
Similarly some types of transmitter, SSB, CW, AM, etc. have a lower
‘average’ output power and the perceived risk is even lower.
ABOUT CE
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands
and/or may be subject to licensing conditions in the
country of use. Be sure to check that you have the
correct version of this radio or the correct program-
ming of this radio, to comply with national licensing
requirement.
To Previous Page
Loading...
Need help?
General
