Icom IC-F3GS User Manual

1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan
A-5621D-1EX-r
Printed in Japan
© 1999 Icom Inc.
Count on us!
IC-F3/4GS series
INSTRUCTION MANUAL
UHF TRANSCEIVER
iF4GT/GS
This device complies with Part 15 of the FCC rules. Oper-
ation is subject to the following two conditions: (1) This de-
vice may not cause harmful interference, and (2) this
device must accept any interference received, including in-
terference that may cause undesired operation.
iF3GT/GS
VHF TRANSCEIVER
2
3
4
5
6
789
0
1
P0
P1
P2 P3

Icom IC-F3GS Specifications

General

Frequency Range	136-174 MHz
Power Output	5W
Channel Spacing	12.5 / 25 kHz
Modulation	FM
Battery Life	10 hours
Operating Voltage	7.2V
Voltage	7.4 V

Summary

PANEL DESCRIPTION

Switches, Controls, Keys, and Connectors

Details physical components and their locations on the transceiver.

Function Display

Explains the indicators and information shown on the transceiver's display panel.

BATTERY PACKS

Battery Pack Replacement

Step-by-step guide for removing and attaching battery packs.

Battery Charging

Instructions for rapid and regular charging of battery packs using various chargers.

Charging Note

Battery Cautions

Important safety warnings and handling instructions for battery packs.

PROGRAMMABLE FUNCTIONS

DTMF and Emergency Functions

Keypad Lock and Priority Channel

CONVENTIONAL OPERATION

Receiving, Transmitting, and Call Procedures

Covers basic receiving/transmitting, call procedures, and Tx code selection.

SmarTrunk IITM OPERATION

Basic Operation and Call Handling

Covers basic SmarTrunk II™ operation, PTT dispatch, and call reception.

Advanced SmarTrunk II™ Features

MAINTENANCE

Optional Unit Installation

CLONING

Transceiver-to-Transceiver Cloning

PC-to-Transceiver Cloning