EasyManua.ls Logo

Icom IC-F310S

Icom IC-F310S
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
This device complies with Part 15 of
the FCC Rules. Operation is subject to
the condition that this device does not
cause harmful interference.
VHF TRANSCEIVER
UHF TRANSCEIVER
iF320S
iF310S
iF410S
iF420S
Question and Answer IconNeed help?

Do you have a question about the Icom IC-F310S and is the answer not in the manual?

Icom IC-F310S Specifications

General IconGeneral
TypeVHF Transceiver
Frequency Range136-174 MHz
Dimensions120 x 50 x 30 mm
Weight320 g
Battery LifeApprox. 10 hours
Channel Spacing12.5 / 25 kHz
ModeFM
Channel Capacity16 channels
Power Output5W
Output Power5W
Voltage7.4V DC

Summary

Important Information, Cautions, and Definitions

Important Usage Instructions

Read all instructions carefully before using the transceiver for safe operation.

General Cautions and Warnings

Advises on critical warnings and precautions to prevent damage or injury.

Explicit Definitions of Terms

Defines specific terms used throughout the manual for clarity and understanding.

Panel Description

Front Panel Overview

Details the physical layout and components of the front panel.

Function LED Indicators

Explains the indicators and their meanings for transmitting and receiving status.

Programmable Function Keys

Explains functions assignable to programmable keys like ATT, BANK, BEEP, CALL, CH UP/DOWN, DTMF, EMERGENCY, LIGHT.

Other Control Keys

Details keys for OUTPUT POWER, SCAN, PRIORITY, TALK AROUND, and MONITOR functions.

Switches and Product Information

Explains the GRP and SCRM switches and product information for voice scramblers.

Operation

Turning Power ON and Channel Selection

Instructions for powering the transceiver on and selecting operating channels.

Receiving and Transmitting Procedures

Step-by-step guide for receiving calls and transmitting messages.

Transmitting Notes and Timers

Provides information on transmit inhibit, time-out, and penalty timers.

DTMF, Scrambler, and User Settings

Explains DTMF, scrambler functions, and how to customize settings in user set mode.

Connection and Maintenance

Rear Panel and Connections Diagram

Illustrates how to connect antenna, microphone, speaker, and power cable.

Supplied Accessories and External Connections

Lists accessories and details connections for antenna, power, speaker, and optional cables.

Mounting and Optional Unit Installation

Instructions for mounting the transceiver and installing optional units.

Optional Cable, Fuse Replacement, and Cleaning

Covers OPC-617 cable, fuse replacement, and cleaning procedures.

Optional SmarTrunk II Operation

SmarTrunk II and Conventional Modes

Explains the transceiver's capability for SmarTrunk II™ and conventional communication.

Placing and Receiving Calls

Procedure for placing telephone calls, calling subscribers, and answering calls.

Call Management and Speed Dialing

How to terminate calls, redial, use memory speed-dial, and Turbo SpeeDial.

System Operation and Emergency Calls

Information on system busy signals, dispatch calls, and emergency calls.

Clear Channel Alerting

Details how the transceiver alerts for clear channels and redials.

Options

External Speakers and Microphones

Description of available external speakers and microphones.

Optional Units and Cables

Information on optional units like UT-96, UT-105, UT-109/UT-110, and OPC-617.

Related product manuals