Need help?Do you have a question about the Icom IC-F4101D and is the answer not in the manual?
Details on output power, modulation, frequency deviation, and spurious emissions.
Key performance metrics including sensitivity, selectivity, and audio output.
Detailed description of RF, 1st IF, and 2nd IF/demodulator circuits.
Procedures for adjusting PLL lock voltage, reference frequency, and verifying.
Steps for setting output power, modulation balance, and deviations.
Procedures for adjusting receive sensitivity, S-meter, and squelch thresholds.
General| Frequency Range | 400-470 MHz |
|---|---|
| Water Resistance | IP54 |
| Mode | FM/Digital |
| Power Output | 5W |
| Operating Voltage | 7.2V DC |
| Channel Spacing | 12.5 / 25 kHz |
To Next Page
